You also should never pull the vacuum by the power cord, as this puts a lot of stress on the connection.. Sucking up liquids (or damp materials.).
If possible, we recommend emptying the Shark WV200UK into an outdoor bin.The bagless bin latch system allows dust to escape into the air when emptying, which is bad news for people with allergies.. 2.
Press The Bin Opening Slider And Empty The Vacuum.Once the vacuum has been.positioned correctly over a bin.
, emptying the Shark WV200UK is as simple as pressing the “One Touch Easy Empty” slider located next to the On/Off switch..Pressing this button causes the vacuum’s bin to hinge downwards.
Most dirt, hair, and other debris should fall into the bin, but you may need to give it a gentle tap to remove anything that remains.. Shark also recommends tapping the filter screen to get rid of dirt and debris that might be stuck on it.
The filter screen is the metallic sheet that’s located on the opposite side of the bin to the hinge.. 3.The first is on the rear of the vacuum body (almost directly behind the red trigger)..
The other two screws are located on the bottom of the battery.You’ll need to tilt the vacuum onto its side to access them.. It’s worth noting that the bottom screws are meant to be at an angle.
Keep this in mind when removing and replacing the screws.. Be very careful to use the right screwdriver when removing the battery.Using the wrong screwdriver risks stripping the screw heads, which makes the battery very difficult to remove without specialist tools.